Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

                    Interlock/selective Sw. - Proximity switch

                    Aux. contact of transducer / detector

 As I/O of S/W PLC Controller

 Industrial ON/OFF control

Features

 8/16  isolated DI and 8/16  isolated DO channels

 32-bit timer with time up interrupt

 High voltage isolation on all isolated channel (2500Vac)

 Software debounce : No debounce, 100Hz, 200Hz, 1KHz 

 No output transition during start-up

 Output status readback

 External triggered interrupt(on IN07 ~ IN00)

 Keep output state after hot reset (jumper selectable)

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input : 8/16 isolated digital input

 Software debounce : No debounce, 100Hz, 200Hz, 1KHz

 ON state : 2.8Vdc(max) 4.5mA(min)

 OFF state : 8Vdc(min) 3mA(max)

 Switching Speed : limited by photo coupler speed

 Interrupt : IN07 ~ IN00

Main Card -- Output Section

 Output : 8/16 isolated digital output

 Output rating : 3A @250Vac, 30Vdc(Relay)

 Output range : Open collector 0 ~ 45Vdc(on card)

                             1A @48Vdc(NMOS)

 Sink current : 500mA(peak) per channel(on card)

                             1A @24Vdc(PMOS)

 Switching speed : 20KHz(max)(MOS out only)

                             2A @240Vac(SSR)(with wiring board)

Main Card -- Timer

 Length : 32-bit @1us

 Interrupt : time up interrupt

Main Card -- General

 Card ID : 0~3

 Operation temperature : 0 to +70 degree C

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Storage temperature : -20 to +80 degree C

 Isolation voltage : 2500Vac 1Min

 Operation humidity : 5~95% RH, non-condensing

 Connector : One / Two 20-pin male flat cable connectors

 Dimensions : 90(W)*96(H) mm, 3.6(W)*3.8(H) in

DIN rail mounted wiring board

ADP9201DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator

                   ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator

                   ADP9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*3.2(L)*2.1(H) in

                        ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in 

JS51053 20PM DIN rail mounted wiring board

 Connection cable : 20-pin flat cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

 Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview

 Linux 2.6

 Hardware

 Software

 Main Card

 Wiring Board

 Driver

 Driver

 Driver

PRODUCT

DESCRIPTIONS

 1.

DIO6208

16-channel Digital I/O Card for 8 DI and 8 DO Photo-coupler isolated

 2.

DIO6216

32-channel Digital I/O Card for 16 DI and 16 DO Photo-coupler isolated

 3.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO

 4.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO

 5.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO

 6.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO

 7.

JS51053

DIN rail mounted dummy wiring board

 8.

M23209

20-pin flat cable 3.0 M for ADP9201_JM1/ADP9201_JM2

 9.

M23207

20-pin flat cable 1.5 M for ADP9201_JM1/ADP9201_JM2